Users Guide

– SNMP Encryption Password — Maximum length is 255 characters. When the SNMP
Authentication Password is empty, the SNMP Encryption Password is also empty.
• HTTPs — Select the HTTPs based device communication for managing third-party enclosures.
– HTTPs User Name — The user name for HTTPs-based device communication. Maximum length is
255 characters.
– HTTPs Password — The password for HTTPs-based device communication. Maximum length is
255 characters.
– HTTPs Port — The port for HTTPs-based device communication. Enter a port number from 1 to
65535. The default port 443.
• SSH — Select the SSH based device communication for managing third-party enclosures.
– SSH User Name — The user name for SSH-based device communication for managing third-party
enclosures. Maximum length is 255 characters.
– SSH Password — The password for SSH-based device communication. Maximum length is 255
characters.
– SSH Port — The port for SSH-based device communication. Enter a port number from 1 to 65535.
The default port is 22.
NOTE: You can change the protocol timeout settings in the Settings → General tab.
Adding a protocol
1. In the left pane, expand Tasks, and click Protocols.
The Protocol screen is displayed.
2. In the task menu, click Add.
The Add Protocol window is displayed.
3. Enter a name for the protocol in the Profile Name text box.
4. Enter a description for the protocol in the Description text box.
5. Under Protocol Information, select one of the following options:
• IPMI (Server)
• WS-MAN (Chassis)
• SNMPv1v2c (UPS/PDU)
• SNMPv3 (UPS/PDU)
• HTTPS
• SSH
Editing a protocol
You can edit the protocol information of a device.
1. In the left pane, expand Tasks and click Protocols.
The Select Connection Protocol screen is displayed.
2. Select the check box next to the protocol you want to edit.
3. In the task menu, click Edit.
The Edit Protocol window is displayed.
4. Make the required changes.
5. Click Finish to save your changes, or click Cancel to discard them.
61