Users Guide

Type Description Severity Level
IPMI Processor Temperature Trip Events related to the server
processor temperature trip.
Critical
IPMI Test An IPMI test event was received. Informative
MPCM Configure Failed Failed to set MPCM on the
chassis.
Warning
MPCM Not Supported The Dell chassis does not support
MPCM. Upgrading firmware on
the chassis might be required.
Warning
PDU High Load The PDU power is greater than
the high load threshold.
Warning
PDU Low Load The PDU power is lower than the
low load threshold.
Warning
PDU Outlet High Load The PDU outlet power is greater
than the high load threshold.
Warning
PDU Outlet Low Load The PDU outlet power is lower
than the low load threshold.
Warning
PDU Outlet Off The PDU outlet is Off. Informative
PDU Outlet On The PDU outlet is On. Informative
PDU Outlet Overload The PDU outlet is overloaded. Critical
PDU Overload The PDU is overloaded. Critical
Protocol Operation Failed Device protocol operation failed. Warning
Server Capabilities Changed The server capabilities have
changed, for example, a license
change. This event is only
applicable to a device that has a
policy applied. When you see
such an event, check the policy
on the device.
Warning
Unsupported Sampling Interval Cannot set sampling interval to
device. Dell iDRAC 6 devices with
a BMC firmware version older
than version 1.5 only support a 1-
minute sampling interval. Use a
1-minute sampling interval for
such device, or upgrade the BMC
firmware to newer version.
Warning
UPS Battery Failed Events related to battery failure in
the UPS.
Critical
104