Users Guide

WS-MAN Parameters
Retries 1 Use to provide the number of
times a WS-MAN request must be
sent when a timeout occurs.
Valid range is 1 to 10.
Port 443 Use to provide the WS-MAN port
value. Valid range is 1 to 65535.
Configuration Parameters
You can set the values for the configuration parameters based on your requirements.
Table 14. Configuration parameters
Configuration Parameters
Parameter Name Default Value Description
Warranty URL https://api.dell.com/support/
assetinfo/v4/getassetwarranty/
URL to fetch warranty details.
Warranty Critical Days 10 Number of days left before
warranty expires.
Warranty Warning Days 30 Number of days left before
warranty expires.
RACADM Install Path /opt/dell/srvadmin/sbin/racadm Absolute RACADM installation
path.
JAVA Install Path /usr/bin/java Absolute Java installation path.
Creating auto-discovery jobs
You can create Auto-Discovery jobs in the Nagios XI console. These jobs will allow you to easily choose
the hosts from an auto-discovery job that should be monitored.
To create auto discovery jobs, perform the following steps:
1. Select Configure → Configuration Wizards.
2. Add new auto discovery jobs by performing one of the following steps:
• Select Configuration Tools → Auto-Discovery in the left pane.
The Auto-Discovery Jobs page is displayed. Click the New Auto-Discovery Job button or the
Add one now link.
• Click Auto-Discovery wizard from the list of wizards displayed.
Once the Configuration Wizard: Auto-Discovery - Step 1 page is displayed, click the launch a
new discovery job link.
3. In the Scan Target field, enter a network address and netmask to define the IP ranges to scan.
4. In the Exclude IPs field, enter a comma-separated list of IP addresses and/or network addresses to
exclude from the scan.
You can select a frequency from the Frequency drop down list if desired.
5. Click Submit.
The new Auto-Discovery job is created successfully and its details are displayed.
14