Users Guide
The discovery script is failing to execute
1 The discovery script has appropriate permissions.
Recommended: Nagios Administrator.
2 The appropriate arguments are provided while running the script.
The discovery script is not creating the host and
service denition le for IPv4 or IPv6 addresses or
hosts when the protocol selected is 1 (SNMP)
1 Net-SNMP is installed.
2 The IP addresses or hosts are reachable.
3 SNMP is enabled on the given IP addresses or hosts.
4 The appropriate protocol credentials are correctly congured in the following les before running a discovery:
dell_resource.cfg
.dell_device_comm_params.cfg
5 For an IPv6 address, ensure that the Perl Module Socket6 is installed in the same Perl library path.
6 At least one of the applicable service is enabled in the following service template:
dell_server_services_template.cfg
.
The discovery script is not creating the host and
service denition le for IPv4 or IPv6 addresses or
hosts when the protocol selected is 2 (WSMan)
1 Openwsman and its Perl binding are installed.
2 The IP addresses or hosts are reachable.
3 The appropriate protocol credentials are correctly congured in the following les before running a discovery:
dell_resource.cfg
.dell_device_comm_params.cfg
4 For an IPv6 address, ensure that the Perl Module Socket6 is installed in the same Perl library path.
5 At least one of the applicable service is enabled in the following service template:
dell_server_services_template.cfg
.
The Dell EMC device’s IP address or host name
changes after discovery of the device
Remove the old conguration le and rediscover the Dell EMC device using a new IP address or hostname.
40
Troubleshooting