Users Guide

Service Status Description
Dell EMC Storage SC-Series Management
Traps
The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap information of the Compellent
SC-Series storage Arrays
Dell EMC Storage SC-Series Controller
Traps
The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the Compellent
SC-Series storage Arrays.
Dell EMC Storage MD-Series Traps The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the PowerVault
MD-Series storage arrays.
Viewing SNMP alerts
Prerequisites:
• Nagios Core with SNMPTT is installed and congured and the Dell integration on SNMPTT is congured.
• SNMP Trap destination is congured with Nagios Core server in the supported Dell EMC devices.
NOTE
: To receive SNMP traps from PowerVault MD 34/38 series storage arrays, SNMP trap destination must be
congured for that device in the Modular Disk Storage Manager (MDSM) console.
For information on conguring SNMP Trap destination in the iDRAC interface, see Appendix.
To view SNMP alerts:
In Nagios Core user interface, under Current Status, select Services and then navigate to the respective Dell EMC device specic
trap service.
Displays the last received SNMP alert in the status information and the severity of the alert is updated in the status. To view all the
SNMP alerts that were received, select
Reports > Alerts > History.
Monitoring Dell EMC devices
33