Users Guide

Monitoring component health status of Dell EMC devices
To monitor the component health status of Dell EMC devices:
1 In Nagios Core user interface, under Current Status, select Services.
2 Select the associated service to monitor the health of Dell EMC device.
Health monitoring of Dell EMC devices is performed through iDRAC with LC and corresponding details are shown in their respective
component health service with proper severity health color.
Monitoring SNMP alerts
About SNMP alert monitoring
You can asynchronously receive the SNMP alerts forwarded from the devices.
Once an SNMP alert is received, the respective device’s service will display the alert summary message and alert severity of the last
received alert in the Nagios Core console.
Table 25. Dell trap information
Service Status Description
Dell EMC Server Traps The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the Dell EMC
Server raised through agent-free method.
Dell EMC Chassis Traps The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the M1000e,
VRTX, and FX2/FX2s Chassis.
Dell EMC Storage PS-Series Member
Traps
The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the EqualLogic
PS-Series storage Arrays.
Dell EMC Storage PS-Series Group Traps The following states are possible:
• OK
• Warning
• Unknown
•
Critical
Provides trap Information of the EqualLogic
PS-Series storage Arrays.
32 Monitoring Dell EMC devices