Users Guide

Health polling of servers is done through iDRAC with LC and the corresponding objects are shown in their respective health service
with proper severity health color.
Monitoring component health of Dell EMC devices
You can monitor the health of individual components of the supported Dell EMC devices.
About monitoring component health of Dell EMC devices
This is a periodic poll based health monitoring of a Dell EMC device’s component level health status.
Once the discovery utility is run with the relevant option, the corresponding services are created. These services run periodically and
update the overall health of the components. The component’s status and information are displayed in the Nagios Core user interface.
The format of the component information in the Status Information column is <Attribute>=<Value>, <Attribute>=<Value>.
For example: Status=CRITICAL, FQDD=Fan.Embedded.1, State=Enabled
Table 19. Dell EMC device’s component health information
Service Status Description Attributes displayed
when using WSMan
Attributes displayed
when using SNMP
Dell EMC Server
Memory Status
The following states are
possible:
OK
Warning
Unknown
Critical
Provides the worst case
aggregate health status
of the memory in Dell
EMC Servers.
Status
FQDD
PartNumber
Size(GB)
Speed(MHz)
Type
Status
FQDD
State
PartNumber
Size(GB)
Speed(MHz)
Type
Dell EMC Server
Physical Disk Status
Provides the worst case
aggregate health status
of the physical disks in
Dell EMC Servers.
Status
Fully Qualied Device
Descriptor (FQDD)
State
FirmwareVersion
FreeSpace(GB)
Media Type
Product ID
Serial No
Size(GB)
Status
FQDD
State
FirmwareVersion
FreeSpace(GB)
Media Type
Product ID
Serial No
Size(GB)
Dell EMC Server Virtual
Disk Status
Provides the worst case
aggregate health status
of the virtual disks in Dell
EMC Servers.
Status
FQDD
State
Layout
Media Type
ReadPolicy
Size(GB)
Status
FQDD
State
Layout
Media Type
ReadPolicy
Size(GB)
Monitoring Dell EMC devices 25