Users Guide

Service Status Description

Dell Storage EqualLogic Member

Traps

The following states are possible:

• OK

• Warning

• Unknown

• Critical

Provides trap Information of the

Dell EqualLogic PS-Series storage

Arrays.

Dell Storage Compellent

Controller Traps

The following states are possible:

• OK

• Warning

• Unknown

• Critical

Provides trap Information of the

Dell Compellent storage Arrays.

Dell Storage PowerVault MD

Traps

The following states are possible:

• OK

• Warning

• Unknown

• Critical

Provides trap Information of the

Dell PowerVault MD storage

arrays.

Viewing SNMP alerts

Prerequisites:

• Nagios Core with SNMPTT is installed and configured and the Dell integration on SNMPTT is

configured.

• SNMP Trap destination is configured with Nagios Core server in the supported Dell devices.

NOTE: To receive SNMP traps from Dell PowerVault MD 34/38 series storage arrays, SNMP trap

destination must be configured for that device in the Modular Disk Storage Manager (MDSM)

console.

For information on configuring SNMP Trap destination in the iDRAC interface, see Appendix.

To view SNMP alerts:

In Nagios Core user interface, under Current Status, select Services and then navigate to the

respective Dell device specific trap service.

Displays the last received SNMP alert in the status information and the severity of the alert is updated

in the status. To view all the SNMP alerts that were received, select

Reports → Alerts → History.