Users Guide

Options Short Description Description
-d
detailed services All services monitor option based
on services defined in service
template file.
If you run the utility without this
option, then the basic three
services are created. For more
information, see
Table 3. Default
services created based on
selected protocol.
.
Based on the options you selected during discovery, the following services are associated with that host:
• If you run perl dell_device_discovery.pl without the -d option, then only the basic services
are created by default and displayed in the user interface under Services.
NOTE: SNMPTT must be configured for you to be able to receive traps.
• If you run perl dell_device_discovery.pl with the -d option, additional services are created as
listed in the the table below, and are displayed in the Nagios Core console under Services:
Table 10. Default services created for Dell servers based on the selected protocol
Services SNMP WS-MAN Protocol
Basic Services
Dell Server Overall Health Status √ √
Dell Server Information √ √
Dell Server Traps √ √
Detailed Services
Dell Server Physical Disk Status √ √
Dell Server Virtual Disk Status √ √
Dell Server Fan Status √ √
Dell Server Battery Status √ √
Dell Server Intrusion Status √ √
Dell Server Network Device
Status
√ √
Dell Server Voltage Probe Status √ √
Dell Server Controller Status √ √
Dell Server Amperage Probe
Status
√ √
Dell Server CPU Status √ X
Dell Server Power Supply Status √ X
Dell Server Temperature Probe
Status
√ √
Dell Server SD Card Status X √
16