Setup Guide

System requirements for management systems
The requirements for the management systems are as follows:
• Red Hat Enterprise Linux (RHEL) 7 and RHEL 6.6 (32-bit and 64-bit)
• SUSE Linux Enterprise Server (SLES) 11 and SLES 10 (32-bit and 64-bit)
ESXi running the supported versions of RHEL and SLES guest operating systems is also supported.
System requirements for managed systems
The requirements for the managed systems are as follows:
Table 2. Supported firmware versions for Dell devices
Dell Device Firmware Supported Firmware Versions
Dell 12th generation of PowerEdge
servers
iDRAC7 2.20.20.20 and 2.15.10.10
Dell 13th generation of PowerEdge
servers
iDRAC8 2.20.20.20 and 2.15.10.10
Dell 13th generation of PowerEdge
servers (T130, T330, R230, and R330)
iDRAC8 2.22.22.22
Dell PowerEdge R530xd iDRAC8 2.20.20.20 and 2.12.12.12
Dell PowerEdge R930 iDRAC8 2.20.20.20 and 2.13.13.12
Dell PowerEdge C4130 iDRAC8 2.20.20.20 and 2.15.10.10
Dell PowerEdge C6320 iDRAC8 2.14.14.12
Dell Datacenter Scalable Solutions (DSS
1500 and DSS 2500)
iDRAC8 2.16.16.12
Dell Datacenter Scalable Solutions (DSS
1510)
iDRAC8 2.17.17.13
Dell PowerEdge M1000e Chassis CMC 5.1 and 5.0
Dell PowerEdge VRTX Chassis CMC 2.1 and 2.0
Dell PowerEdge FX2/FX2s Chassis CMC 1.3 and 1.2
Dell Compellent Storage Arrays NA 6.6 and 6.5
Dell EqualLogic PS-Series Storage Arrays NA 8.0.4 and 7.1.7
Dell PowerVault MD 34/38 Series Storage
Arrays
NA 8.20.09.60 and 8.20.05.60
• If you are using SNMP, ensure that SNMP is configured in the respective devices.
If you want to receive SNMP traps in the Nagios Core console, ensure that you configure the SNMP
trap destination in the respective devices.
7