Web Client Guide

218 Visualize My Network | Visualize
Circular
Circular layouts arrange all nodes in a circle.
Minimal circle radius – Use the slider to determine the radius of
the circle.
Minimal nodes spacing – Use the slider to determine the nodes
spacing.
Wedge Angle –Use the slider to determine the arc where child
nodes appear.
Overlap avoidance method –Select Approximate or Deterministic .
Root node selection policy –Select Most weighted (for general graphs), Manual (for general
graphs)
or Directed (only for tree graphs) .
Link drawing type –Select from Straight, Straight polyline, Curved polyline, Orthogonal polyline,
Orthogonal curved.
Cluster Policy
–Select Vertical or Horizontal . This determines the (automated) orientation of the
topology. Remember, you can click and drag device icons.
Cluster Spacing —Use the slider to determine the spacing between icons not in child / parent
hierarchy.
Hierarchical-Cyclic
This arranges connections in a hierarchy. Use the
following settings to alter its appearance.
Distance between levels – Use the slider to determine
the distance between levels.
Distance between nodes – Use the slider to determine
the distance between nodes.
Orientation – Select from Top to Bottom, Bottom to Top, Left to Right or Right to Left .
Draw edges from –Select from Node Center or Node Side .
Link drawing type –Select from Straight, Straight polyline, Curved polyline, Orthogonal polyline
or Orthogonal curved .
Cluster Policy –Select from Horizontal or Vertical .
Cluster Spacing —Use the slider to determine the spacing between icons not in child / parent
hierarchy.