Web Client Guide

Managed Resources | Resource Management 175
Network Details
This displays network information like VLAN(s) by ID, VLAN(s) by Port and STP Data . Use the
pick list in the upper right corner of this snap panel to select which to display.
Utilization Summary
A graph of the device utilization, typically for CPU, Disk I/O, Memory and ping rate.
Bandwidth Utilization
A graph of the device’s bandwidth utilization. Notice that you can change the number of top
interfaces graphed, when this is applicable.
New Link
When you create a new link, the Link Details screen appears where you can configure the link.
This screen has the following fields:
Link Name —A text identifier for the link.
Link Type —Select the type of link from the pick list.
A End Point Resource / Address —Click the plus (+) to select a resource for one end of the link.
When you right-click a selected resource, it automatically appears here. Click the minus (-) to
remove it.
Z End Point Resource / Address —Click the plus (+) to select a resource for one end of the link.
When you have selected two resources, they automatically appear as A and Z endpoints.
Tip
Remember, you can only multi-select in the expanded version of the portlet.