Users Guide

Distributed and HA Servers Installer | Installation User Interface
OMNM 6.5.3 Installation Guide 87
Distributed and HA Servers Installer
This section shows the distributed and HA installer options.
Window/Prompt Field/Option Description
Software
Requirements
Displays some minimum system requirements and provides:
• A link to access the
OpenManage Network Manager User
Guide
from the user interface
• The
OpenManage Network Manager User Guide location
from the command line
License
Agreement
Allows you to install the product when selected. If this is a new
installation, the next step is to choose the installation types. If this
is an upgrade, the next step is to choose the database backup
options,
Installation Types Express Install Installs the most common program features to their default
locations. This option is recommended for most users. When
selected, the next option is to select Managed Devices.
The express install asks for the target RTM and completes the
install based on current sizing guidelines.
Custom Installs the program features you select to the location you specify,
and allows you to specify how they are configured. When selected,
the next option is to Choose Install Folder.
Choose Install
Folder
Directory Name Provides the default directory. Optionally specify a different
directory.
Managed Devices Number of
Managed
Devices
Provides a list of managed device ranges from which to select. The
default is less than 50.
• less than 50 (8GB RAM)
• 50 to 200 (12 GB RAM)
• 200 to 500 (16 GB RAM)
• 500 to 100 (24 GB RAM)
• 1000 to 5000 (64 GB RAM)
Note: Selecting a higher range increases system memory
requirements.
If multiple network interfaces were detected on your local host, the
next option is Network Interfaces/Network Address.
Network
Interfaces/
Network Address
Address Lists the network interfaces detected on the local machine. Select
or enter which address to use for the OMNM application.
If you selected Express installation, your system is scanned for port
conflicts. If conflicts are found, the Warning! Possible port conflicts
window is displayed. Otherwise, the installation starts. If you did
not create the install folder before starting the installer, you will get
an Invalid Install Folder error.
If you selected Custom installation, the next option is Heap
Settings.