Users Guide

Installing on Windows | Installing Single-Server Deployment

OMNM 6.5.3 Installation Guide 33

• Anti-Virus application (25)

Continue with step 12.

Provide the following information if prompted:

• Installation Folder

• Network Interfaces

If multiple network interfaces were detected on your local machine, select the network

address to be used by this software. If your Windows version does not support the

installer finding the host’s IP address, you are prompted for an IP address and Partition

Name for your installation.

• Heap Settings

• MySQL Setup

• Windows Firewall Access

After your selections, your system is scanned for database or port conflicts. If you receive any

errors, resolve them before continuing. For example, an existing MySQL service displays an

error or the following running processes could cause a port conflict:

• SNMP service (161)

• Anti-Virus application (25)

Click Install.

If you select Yes, the Server Status Console displays the Application server, Web server, and

Database server initialization status so you know when all the servers are running.

If you select No, you need to verify that the appserver status shows ready by doing one of the

following:

• Roll over the appserver tool in the system tray.

• Enter

pmgetstatus

from the command line.

Click Done.

By default, the servers automatically start after the installation successfully completes.

Verify your installation as follows.

a. Start the application by doing one of the following:

• Click Launch Web Port from the Server Status Console window.

• Enter the following URL from your browser:

http://hostID:8080/login

For the host ID, enter either the IP address or host name.

b. Sign in with the default credentials:

username=admin

password=admin

c. Set a password reminder.

d. Click Save.

The OpenManage Network Manager Home page is displayed and you are ready to start

Completing Post-Installation Tasks on page 65 for use. Otherwise, resolve issues before

continuing.