Users Guide

Installing Mediation Servers | Clustering
OMNM 6.5.3 Installation Guide 123
Installing Mediation Servers
For clustered mediation servers, first follow these steps to install the Mediation config server, then
see
Installing Remaining Mediation Servers on page 125.
1 Install by starting the installation wizard, and select Mediation Server in the Custom
installation screen.
2 Enter the Application Server Partition Name.
3 Enter Mediation Partition Name and Subnet mask, and select Auto Start.
You can use the default subnet mask if mediation server and application server are all with in
the /24 subnet. If they are different, then you must adjust the mediation subnet mask or use
unicast to point mediation server directly to the application servers.
CAUTION:
You must add file server's IP address to the Mediation Partition's routing entries in distributed
environments that have application server's local mediation turned off.
4 Specify the Server Heap.
5 Specify the Config Server IP. Use the lowest IP address among mediation servers. If you are
not clustering mediation servers, select the
No mediation listener as redundant peers option.
See
Mediation Clustering on page 129 for more about the alternative.
6 Follow the instructions in Adding Mediation Servers on page 56 to make the mediation
server appear in Control Panel.
7 Once the application server is ready, you can click Yes for Start the Server Now on the
mediation server you have installed.