User guide

9
If the device does not match all required authentications, you can click the Fix it icon
(wrench and screwdriver crossed) to edit them for the selected device. You can also click
Te s t
Device
, Create New, or Choose Existing authentications while in the editor clicking the Fix it
icon displays.
When authentications are unsuccessful, you can remove or edit them in this editor too. Click
the icons to the right of listed authentications to do this.
9 Save— Click Save to preserve the profile. You can then right-click it to select Execute and
begin discovery
. If you select Execute from the profile editor, Dell OpenManage Network
Manager does not save the profile to execute later.
Results
10 Execute —Clicking Execute begins discovery, and the message traffic between Dell
OpenManage Network Manager and the device appears on the
Results screen.
This is a standard
Audit screen.
11 A message ( Discovery Profile Execute is complete ) appears in the Messages at the bottom left
of the status bar.
NOTE:
You can also schedule discovery profiles to run periodically, updating your Dell OpenManage Network
Manager database with any network changes.
12 The devices in your network now appear in the Resource Management portlet, and elsewhere
(in Topology, for example).
Resource Management
The Managed Resource portlet
displays all the devices you have
discovered.
Right-clicking a listed resource
displays a menu with options
described in the
User Guide .