Quick start manual

13
• Excessive interface errors
When you receive an alarm you can take any of the following action on the alarm itself, or the
target of the alarm:
•Assign User
•Acknowledge Alarm
• Unacknowledge Alarm
• Clear Alarm
• Show Performance
Follow these steps to get started:
1 Click to go to the Alarms page from the default screens.
2 In the Alarms portlet, click on an Alarm of interest.
Tip
If your Alarms portlet displays a graph of different alarm types, clicking on s particular alarm severity
filters the list below to only display that severity. Click again to undo the filter effect.
3
Right-click on the selected alarm, and then click Acknowledge Alarm to take ownership of the
alarm.
4 Right-click then click Assign User to select a user owner for the alarm.
5 Right-click then click Clear Alarm to remove the alarm from list.
6 Click the plus (+) in the upper right corner of the Alarms portlet to go into Expanded mode
where you can view more details about an alarm.