Users Guide

Network Virtualization Portlets | Virtualization Management
OMNM 6.5.3 User Guide 931
Figure 18-3. Editing Software Image Window
The Editing Software Image window allows you to change the following fields and options as
required (Table 18-6).
Table 18-6. Editing Software Image Fields/Options (Sheet 1 of 2)
Field/Options Description
Name Modify the name that allows you to identify the software image.
Description Provide more details about the software image.
For example, mention customizations made for your use and the original vendor-
provided image from which you created the software image.
Cloud Provider Select a different target container where you plan to deploy the image. When you
select a provider, the Container Format and Disk Format lists are populated
based.
Vendor Modify the name for the vendor that supplied the initial image used to create this
software image descriptor.
Version Modify the version for the vendor-supplied image.
URL Provide a different local environment’s file server or disk location where the
snapshot image file (.qcow2) is stored, for example:
ftp:// caserverIP /vnf/images/juniper/firefly/Juniper-
Firefly-shapshot-2.qcow2
Checksum Enter the value assigned to the image snapshot instance located in your
OpenStack environment.
For example, an F5-BIGIP LTM-SS1 image could look
like this:
9275adf3c578c60754b3d56dcbbed5c8
This value is used to detect errors introduced during transmission or storage and
it is provided by the image manufacturer.
Min Disk Modify the minimum disk size required in gigabytes, such as 2. The default is 0
(zero) if you do not enter a value.
This identifies how much disk space is required for the image to boot and operate.