Users Guide

Getting Started | Virtualization Management
920 OMNM 6.5.3 User Guide
Testing Your OMNM Setup
It does not matter if you set up your OpenManage Network Manager (OMNM) Network
Functional Virtualized (NFV) work environment (pages/portlets) or if it was defined by your
system administrator, you should run
some tests to make sure you have what you need and you can
perform some basic tasks on a record, such as discover, stage, deploy, modify, undeploy, and delete.
This test example uses an NFV record and assumes that you have access to the OMNM application
and your OpenStack project.
Test your NFV setup from the OMNM application as follows.
1 Sign out and then sign back in if you are already logged in.
2 Verify that your pages are accessible from the menu bar.
3 Make any necessary changes.
4 Navigate to the Virtual Network Function Records portlet.
This is where you will complete steps 5 through 10.
5 Verify that you can discover VNF records.
a. Right-click > Discover/Resync.
The Discover VNF Records window is displayed.
b. Select a VIM entity.
The VNF Discovery parameters are displayed.
c. Specify namespaces.
d. Click Execute.
The Job Viewer displays the execution progress, any errors, and success/failure, followed
by the Results information.