Users Guide

Managing Descriptors | Configuring Virtualization
882 OMNM 6.5.3 User Guide
3 Enter an on-board date and the version information.
4 Click Apply.
The Editing Network Service Descriptor window is updated based on the information
provided so far.
5 Save the record.
6 Verify that the NS descriptors list displays the new descriptor.
Depending on the descriptor, you may need to define dependencies, data values, lifecycle
events connection points, and so on. The remaining steps are only for connection points,
deployment flavors, virtual links, and VNF descriptors.
7 Define connection points, such as a NS connection point for an F5 BIG-IP VNF service.
a. Right-click
descriptor >Edit.
b. Click Connection Points.
Notice that there are no connection points listed.
c. Click Add.
The general parameters are displayed.