Users Guide

Setting Up the Juniper Firefly VNF Package | Configuring Virtualization

OMNM 6.5.3 User Guide 847

b. Make sure that the router’s gateway IP is reachable from the LAN (your PC) following

project router creation.

c. Create and attach the following networks to the project router:

• net-mgmt

• net-data1

• net-data2

Now you can instantiate a VM from the vendor-created image.

Instantiating a VM from a Vender-Converted Image

Instantiate a VM (virtual machine in the new OpenStack project from the Juniper-Firefly-

snapshot-2 image created in the

Creating a VM Snapshot

section as follows.

Boot up the Juniper-Firefly-snapshot-2 image with the following network connections.

Assign a floating IP address to the eth0/mgmt connection.

Go to the OpenStack dashboard.

Select Project > Compute > Instances.

The instances list is displayed.

Verify that the deployed instance is listed.

Create flavors before creating the VM snapshots.

Linux interface name Firefly Interface Name Network

eth0 mgmt net-mgmt

<None> * 1.1 net-data-1

<None> * 1.2 net-data-2

* The <None> interface names require CLI configuration along with a proper license before the

interface can be configured/enabled and pass traffic. This is done as post-bootup and post device

discovery configuration applied by the OpenManage Network Manager

(

OMNM

)

system (not part of the

base image snapshot).