Users Guide

Setting Up Cisco CSR100V VNF Package | Configuring Virtualization
806 OMNM 6.5.3 User Guide
3 Assign OpenStack image properties to the snapshot image created in step 2.
a. Select Admin > System > Images.
b. Select the Edit Image action for the instance.
The Update Image window is displayed.
CAUTION:
It is critical that the Root, Ephemeral, and Swap Disk settings are all set to 0. Otherwise, the VMs created
later using this flavor and the Cisco CSR 1000v image do not boot properly.
c. Set the disk and memory requirements to zero (0).
d. Select Public.
This is required so that the OpenManage Network Manager system can access and
manage the image later on.
e. Click Update Image.
Your changes are saved.
Once you create the VM snapshot image in the OpenStack environment, you are ready to create a
software image descriptor from the OpenManage Network Manager application.
Creating a Software Image Descriptor
The OpenManage Network Manager (OMNM) Network Functions Virtualization (NFV) feature
uses the software image descriptor to manage, deploy, or migrate images. Create a software image
descriptor record from the OMNM application by:
1 Creating a Software Image Descriptor for a Snapshot
2 Modifying the VIM Software Image Descriptor
The steps provided in this section assume that you have already created a VIM that houses the
snapshot image in the OpenStack environment. If a VIM that houses the snapshot image does not
exist, see
Setting Up Your OpenStack Environment on page 800 before continuing.