Users Guide

Setting Up Cisco CSR100V VNF Package | Configuring Virtualization
OMNM 6.5.3 User Guide 803
10 Suspend the VM instance from the OpenStack dashboard.
11 Take a snapshot of the instance.
12 Boot a new VM using the snapshot.
13 Make sure that the VM is operational and has the proper contents from the original
configuration file created in step 1 applied to its running configuration.
Create a flavor before creating the VM snapshots.
Creating a Flavor
Cisco provides a flavor. However, VIMs require some additional settings to boot properly.
Create a flavor to use from the OpenStack dashboard as follows.
CAUTION:
It is critical that the Root, Ephemeral, and Swap Disk settings are all set to 0. Otherwise, the VMs created
later using this flavor and the Cisco CSR 1000v image do not boot properly.
1 Select Admin > System > Flavors.
2 Click Create Flavor.
The Create Flavor window is displayed.
3 Enter a name, such as Cisco_CSR1000v, and the number of VCPUs.
4 Set the memory required to 4096.
5 Set Root, Ephemeral, and Swap Disk values to zero.
6 Specify which projects to apply the flavor.
If you do not specify a project, the flavor is available to all projects.
7 Click Create Flavor.
Your flavor is created.