Users Guide

Setting Up Cisco CSR100V VNF Package | Configuring Virtualization
800 OMNM 6.5.3 User Guide
Preparing an Image
Before you can discover and manage a Virtualized Network Function (VNF) resource from the
OpenManage Network Manager (OMNM) application, you need to:
1 Set up your OpenStack environment by preparing a Cisco CSR image with the necessary
configuration.
2 Create a software image record from the OMNM application.
Setting Up Your OpenStack Environment
To set up your OpenStack environment, you need to:
1 Deploy the vendor’s base image by uploading the original qcow2 image file received from
your Cisco supplier to a target
Bare Metal OpenStack controller.
2 Create flavors representing the smallest supported flavor to use. The vendor (Cisco) provides
a flavor (Figure 17-3)
.
3 Create VM snapshots that are used to create and export a VIM software image descriptor
within the OpenManage Network Manager application.
Figure 17-3. Cisco_CSR1000v Flavor
OMNM Resource
Configuration Tasks
Once the target VM in the OpenStack environment is fully booted and
can respond to SNMP and CLI requests from the management system,
post discovery tasks are run.
For more details about the Cisco-CSR1000v-Discovery profile and the
tasks that run, see Discovery Profiles on page 798.
Config Method Deacription