Users Guide

Preparing to Configure NFV Infrastructure | Configuring Virtualization
OMNM 6.5.3 User Guide 779
5 Click Create Project.
The new project is saved to the Projects list.
6 Create project networking in an OpenStack VIM (KILO or later release).
a. Select Project > Network > Routers.
b. Click Create Router.
The Create Router window is displayed, where you create a project router with a
gateway interface.
c. Make sure that the router’s gateway IP is reachable from the LAN (your Windows system)
following project router creation.
d. Select Project > Network > Networks.
e. Click Create Network.