Users Guide

Device Prerequisites | Troubleshooting
736 OMNM 6.5.3 User Guide
Copying to the Device Rather than Your System
You can have backup copy running configurations to the device's disk rather than the system’s
database. This requires no intervention of FTP since everything occurs on the device itself. The
option appears when you change the following properties in the cisco.properties file in
owareapps/cisco/lib:
#flags that enable direct copy run start
cisco.rmc.save.config=false
cisco.backup.save.config=false
When these are true you can back up running-config to startup-config for Cisco devices. You can
select this option in addition to standard backup in the backup configuration screen (choose
running-config from the File System pick list, and startup-config from the File Server Protocol pick
list.) You can also trigger it from the
System > General screen's Save Config button.