Users Guide

TCP Port Monitoring | Actions and Adaptive CLI
OMNM 6.5.3 User Guide 643
3 Enter a monitor name and then click the Monitor Option tab.
4 Do not set monitor targets. This single host name or IP is set in the following steps.
5 Select the TCP Port Status by Host Name or IP adaptive CLI.
a. Click add (+).
b. Search for TCP.
c. Select TCP Port Status by Host Name or IP.
d. Click Select.
6 Set the input parameters.
a. Click the input parameters edit icon.
b. Enter the host name or IP and TCP port parameters.
Ignore the Success parameter. Success is the value defined in the action and indicates
success or failure. This is the attribute being monitored.
c. Click Save.