Users Guide

Traffic Flow Portlet | Traffic Flow Analyzer
OMNM 6.5.3 User Guide 539
which case there is no time-slice data and the file will instead contain the same aggregate data
as shown in the chart that appears on the screen below the graph. You can retrieve the
generated file in the
My Alerts area at the lower left corner of the portal.
NOTE:
When you export a line graph to CSV, the resulting file will have the times (minute-by-minute, hourly, etc.)
in the header row, but the spreadsheet program you are using (i.e. Microsoft Excel) will apply default
formatting to these values. You can apply your own custom formatting as needed.
NOTE:
The Export to PDF menu item is not available when canvas based line charts are enabled. If you need to
use this feature turn off Canvas Line Charts in the Application Settings.
Settings —Allows you configure the way OpenManage Network Manager stores and queries traffic
flow data. You can configure how to retain data, based on collection/rollup intervals.
Below the title bar a navigation bar displays the context path. See
Drill Down on page 540 below,
for more about this.
Below that navigation bar a row containing the following controls appear:
Entity Type —Selects the type of entity to report on (Exporters by Equipment Manager, Exporters
by Subcomponent, Applications, Conversations, End points, Senders, Receivers, Autonomous
Systems, and Protocol).
Attribute —Selects which attribute to graph (Bytes, Packets, Bits/Sec).
Refresh —Refreshes the screen (runs the report) applying any new settings.
NOTE:
You can check/uncheck by clicking on the colored squares in the legend below these graphs. This
reveals/conceals lines connected to the labelled item.