Users Guide

Compliance and Change Reporting | Change Management and Compliance
526 OMNM 6.5.3 User Guide
5 Once this occurs, the Change Determination label moves to point to the same configuration
which is reflected by the
Current label.
6 The report which can run to display these changes is OpenManage Network Manager’s
Configuration Change Report . It displays the name of the device in question, the IP address,
date/time of change, who made the change, what was removed and what was added. You can
schedule this report to run immediately after an Change Determination process too, so you
can capture a history of changes.
Forwarding Configuration Change Commands
The following are setup commands for various other devices
Cisco
The following is the configuration to forward notifications to 192.168.1.176;
logging facility local0
logging 192.168.1.176
This configuration comes from executing the following commands on the CLI once you are logged
in to privileged mode
conf t
logging on
logging 192.168.1.176
logging facility local0
end
wr mem