Users Guide

Monitoring Network Availability | Performance Monitoring
OMNM 6.5.3 User Guide 413
SNMP
The SNMP attributes panel lets you specify which SNMP attributes are to be monitored.
You can specify the SNMP attributes the following ways:
• With the SNMP browser, or
• Entering the SNMP attribute properties explicitly.
The
Browse button launches the SNMP MIB browser. (See MIB Browser Tool on page 43) You can
also click the
Device Results tab to open an SNMP authentication screen and log into any device
you specify, even undiscovered devices. Specify the IP address, SNMP Read Community, port,
SNMP version, timeout and retries.
Click on the desired SNMP nodes and then click on the
Add Selection button to add an SNMP
attribute. When done selecting, click the
Done button to add selected attributes to the monitor or
Cancel to abandon the operation and close the browser.