Users Guide

Automation and Event Processing Rules | Alarms, Events, and Automation
OMNM 6.5.3 User Guide 331
8 Get the Varbind OID.
a. Go to the Event Definition portlet (Settings > Alarm Definitions).
b. Right-click the event definition and then select Edit.
The Editing Event Definition window is dispalyed.
c. Click the Message Template tab.
The syslogText OID shows as 1.3.6.1.4.1.3477.1.7.5.1
Verifying the Results
Verify the results as follows.
1 Trigger the syslogNotification::STATE_DOWN event by shutting down an interface.
If the Adaptive CLI action successfully brings the interface back up, it triggers the
syslogNotification::STATE_UP event .
2 Check the audit trail for the Adaptive CLI action.
When successful, it indicates the Adaptive CLI successfully used the syslogText varbind
message.