Users Guide

Automation and Event Processing Rules | Alarms, Events, and Automation
324 OMNM 6.5.3 User Guide
3 Shut down an interface:
> shutdown
4 Bring up the interface
> no shutdown
5 Locate the syslogNotification event in the Event History portlet.
6 Look at the syslogText provided from the shutdown and no shutdown commands.
7 Extract the relevant port information with these messages.
syslogText.0: 6w6d1h: S5000_22: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN:
Changed interface Admin state to down: Te 0/20
syslogText.0: 6w6d1h: S5000_22: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP:
Changed interface Admin state to up: Te 0/20
8 Right-click to create a new Protocol Translation > Syslog rule in the Event Processing Rules
portlet to extract information.
9 Make sure that the filtering tab is not blank as you edit.
For this example set
Source IP is not 0.0.0.0.