Users Guide

Resource Management Portlets and Editors | Resource Management
192 OMNM 6.5.3 User Guide
Additionally, when using Connected Devices, if you have reason to believe that your Network Data
Collection data may be out of date, it is suggested that you run Network Data Collection on any
devices that you believe may have changed.
NOTE:
In order for the Connected Devices feature to have maximum success at finding devices that may be
connected to your managed equipment, it is important to ensure that all devices in your network have all
configuration necessary to enable the following applicable protocols/network technologies: LLDP, CDP,
EDP, ARP, Bridging Tables. The necessary configuration varies from manufacturer to manufacturer, so
please consult with the applicable guides for the devices you are working with.
Access this portlet from the Resources page or the selected connected device’s Details portlet.
Searching and Filtering
Data displayed in the Connected Devices portlet can be searched and filtered on in two ways.
• The Quick Search feature can be used from the minimized portlet view, and allows the user to
search the Remote Device IP, Remote Device ID, Remote Port ID, and VLAN fields.
• Advanced filtering can be done from the portlet's maximized view, and allows any field to be
filtered on.
Fields
The following fields are available for Connected Devices:
• Local Device - The endpoint that is being managed by OpenManage Network Manager.
• Local Port - The port that the Local Device knows about the connected device through.
• Connection Type - This will either be DIRECT or UNKNOWN. If the type is DIRECT, the
connection was discovered via LLDP, CDP, or EDP, and a direct connection is known to exist.
In the case that the type is UNKNOWN, the connection was discovered via bridging data,
and the connection may be either indirect, or direct.