Users Guide

Resource Management Portlets and Editors | Resource Management
186 OMNM 6.5.3 User Guide
Resource Editor
The Resource editor allows you to modify the following options and parameters:
• Resource Editor: General
• Resource Editor: Authentication
• Resource Editor: Management Interface
• Resource Editor: Custom Attributes—This tab appears only if you have configured custom
attributes. See
Redcell > Data Configuration on page 30 for more about them.
Click
Save to preserve any changes made in these screens to OpenManage Network Manager’s
database, or
Close to abandon any changes made in editor screens. Unless the device is a printer,
changes to these screens typically make database changes, not changes on the device.
NOTE:
You can edit fields like Notes and Description in subcomponent cards by right-clicking them in the
resource tree.
Traffic Flow
Analyzer
Configures the selected device to appear in the Traffic Flows displays when you
select the Register option. Selecting UnRegister removes the selected device from
the Traffic Flows displays. See Traffic Flow Analyzer on page 527 for more details on
the analyzer.
There are two Show Traffic menu options available from this sub-menu, both of
which will navigate to full-screen views of the expanded Traffic Flow Portlet and will
show the traffic flow data for the selected device. Show Traffic as Endpoint is
available for all managed devices and this option navigates to a page showing the
traffic where this device was either the sender or the receiver of the flow (as
endpoints are essentially senders and receivers combined). Show Traffic as Exporter
is available only for registered exporters and this option shows all traffic going
through the device.
You also have the option to execute or schedule execution for:
• Create Configuration
• Remove Configuration
• Show Configuration
Delete Removes the selected devices from inventory.
Edit Custom
Attributes
Opens the Custom Attribute Editor where you define field characteristics, such as
whether it is enabled, the label name, and the tooltip.
View as PDF Creates an Acrobat PDF document containing the selected alarms’ content
displayed in the portlet.
Share with User Opens the Share with User window where you select the colleague you want to share
the selected alarms with and then type your message.
Menu Option Description