Users Guide

Resource Management Portlets and Editors | Resource Management
178 OMNM 6.5.3 User Guide
Static Group
Selecting Static Group as the type to create displays a selector screen where you can Name and
select a
Category for the group, then search for available resources with a filter. Click Apply Filter
after you have configured it, and a list of devices fitting its criteria appears. Select device(s) and
click
Add Selected , or simply click Add All to add the entire list to your static group. Notice that
you can continue to re-use this filter to list devices, and continue to select them.
When you select a device, it no longer appears listed. When you click
Done the subsequent screen
displays all devices you have selected. You can click
Add on this screen to return to the previous
screen (or
Remove All to delete the listed devices from the group). At the bottom of this screen,
you can also elect to group devices by
None, Vendor or Common Type (Switch, Router, and so on).
These last two create “trees” with nodes for each vendor or type. You can also click the magnifying
glass to search through listed devices. Clicking
Remove All removes all devices in the group.
Click
Save to preserve the group you have configured.