Users Guide

Schedules | Portal Configuration
OMNM 6.5.3 User Guide 159
Columns
Other than the general navigation and configuration options, the Schedules portlets (summary and
expanded views) include the following columns. The columns displayed by default are noted.
You can view the value for most of the hidden columns by clicking the Settings tool, selecting the
columns tab, clicking Show for the appropriate column, and then applying the change.
Column Description
Enabled A indicator that shows whether the schedule is enabled (check mark) or disabled
(X).
This field displays on the summary and expanded views by default.
Description A detailed description of the scheduled action, such as Network Data Collection,
Default Device Config Backup, and so on.
This field displays on the summary and expanded views by default.
Type The type of action scheduled, such as Traffic Flow Analyzer, Refresh Proscan
Targets or Monitor Targets, System, and so on.
This field displays on the summary and expanded views by default.
Submission Date The date and time that this schedule was submitted.
This field displays on the expanded view by default.
Start Date The date and time to start the scheduled action execution.
This field displays on the expanded view by default.
Next Execution The next date and time that the schedule will execute.
This field displays on the summary and expanded views by default.
Recurrence The frequency in which to execute the scheduled action, such as each weekday,
every three months, only at startup, only once, and so on.
This field displays on the summary and expanded views by default.
End Date The date and time to end the scheduled action execution or the number of
occurrences before ending this scheduled action.
This field displays on the expanded view by default.
Scheduled An indicator that shows whether action will execute on the next start date (check
mark) or not (X). The scheduled action does not execute on the next schedule
start date if it has exceeded the execution count or the specified end date has
passed.
This field displays on the expanded view by default.
Execution Count The number of time the schedule will execute.
This field displays on the expanded view by default.
Domain ID The identifier for the resource domain.
Run Status Indicate the schedules current state, such as waiting.