Users Guide

Standard Port Assignments |
1026 OMNM 6.5.2 User Guide
To operate through a firewall, you may need to override default port assignments.
If you cluster your installation, you must disable multicast for communication through firewalls (to
mediation servers or clients). Refer to the
OpenManage Network Manager Installation Guide for
more information.
NOTE:
To configure ports, open their file in a text editor and search for the default port number. Edit that, save
the file and restart the application server and client. Make sure you change ports on all affected
machines.
Note that mediation service also establishes a socket connection to client on ports 6500 to 6510 for
cut through. Specify such port connections in the
ezmediation/lib/
ezmediation.properties
file . (As always, best practice is to override when specifying
properties.)
Finding Port Conflicts
You can find ports in use with the following command line:
netstat -a -b -o | findstr [port number]
9001
4, 6, 7
(UDP)
mediation.listener.mul
ti cast.intercomm.port
[user.root]\lib\owmediation
listeners.properties
MedSrv <-> MedSrv
(mediation listener multicast
intercommunications port)
medserver
3
9996, 6343
(UDP)
Traffic Flow Analysis trafficanalyzer.ocp You must configure the router to
send flow reports to the
OpenManage Network Manager
server on 6343 for sflow by
default.
31310
4, 6, 7
(TCP)
JBoss AppSrv -> AppSrv
45566
4, 5
(UDP)
org.jboss.ha.frame
work.server.ClusterPart
ition
[user.root]\jboss-*.*\owareconf
\cluster-service.xml
AppSrv -> Multicast, (JBoss HA
frame work server cluster
partition), UDP only
54027
4,7
Process Monitor [user.root]\oware\lib\pmstar
tup.dat
mgmt client -> AppSrv, mgmt
client -> MedSrv (process
monitor local client for server
stop/start/status) app/medserver
1
Remote mediation servers or application servers behaving as though they were mediation servers
(single host installation).
2
Unused in standard configuration.
3
Client does not connect to medserver on this port.
4
This port is configurable.
5
Firewall Impacting
6
The most likely deployment scenarios will have all servers co-resident at the same physical location; as
such, communications will not traverse through a firewall
7
Bidirectional
Destination
Ports
Service Files Notes