Users Guide

Supported Juniper Devices

The following describes supported Juniper devices and their known issues.

• The following monitors were added: Juniper COS, Juniper RPM. (28136)

• Support added for VMX model, except for backup. (24557)

• Support added for HTTP/HTTPS access (24559)

• Supported devices include the following:

- EX4500

- EX6210

- EX82xx

- EX8208

- EX8216

NOTE:

Because EX models transmit MAC address but not IP address, OMNM does not support

Traffic Flow Analysis for these models.

• Supported devices include MX80 (14703)

• Support added for JunOS 11.2. and 12.x

• A router-advertisement statement now exists for IPv6 interface services. (18797)

• Support added for JunOS 10.4R4.5. (15549)

• Updated user interface

Known Issues

• When editing a Juniper interface service, the physical encapsulation field is

blank, even when it has ethernet configuration configured. This is a restriction

from the JUNOS devices. This encapsulation type is no longer supported or is

undocumented. OMNM does not display undocumented configurations. (22272)

• In a Juniper Interface template, adding a new inet address service template, and

attempting to save without setting the address displays an unexpected validation

error. Workaround: After saving the VRF service template, use the Copy Interface

feature to copy an existing interface with an inet address template, save the

interface template, then its inet address sub-service saves. (23628)

• In Static Route services, filling in the first Next Hop information does not persist.

Workaround: Fill this information in twice. (19434)

• Deploying an interface service with a description that contains double quotes (for

example “test port”) fails with a syntax error. Workaround: Avoid double quotes

in interface service description fields. (19508)

• If you encounter a timeout when deploying an OS image, increase the

management CLI interface's timeout to a higher number, for example:. 100

seconds. (15859)

• No support in Juniper BX 7000 Gateway for backup, restore, deploy and Direct

Access. (15772)