Users Guide

Supported HP Procurve Devices

At Port Level: FCReadBytesRate, FCReadRate, FCWriteBytesRate, FCWriteRate,

ISCSIReadBytesRate, ISCSIRead, ISCSIWriteBytesRate, ISCSIWriteRate,

PacketsNetworkIn, PacketsNetworkOut, OctetsIn, OctetsOut.

At the LUN/Disk level: LUNAverageRead, LUNAverageWrite,

LUNAverageQueueLength, LunReadBytesRate, LUNReadRate, LUNResponseTime,

LUNTotalCall, LUNWritten, LUNWrite.

Known Issues

No known issues at this time.

Supported HP Procurve Devices

The following describes supported HP Procurve devices and their known issues.

• Support added for STFP. (24683)

• Supported devices include the following:

A6713A, A6716A, A6717A, J3177A, J3299A, J4110A, J3100A, J3175A, J3245A,

J3298A, J4120A, J4121A, J4122A, J4122B, J4138A, J4139A, J4812A, J4813A,

J4819A, J4840A, J4841A, J4860A, J4865A, J4874A, J4887A, J4899A, J4899B,

J4899C, J4900A, J4900B, J4900C, J4902A, J4903A, J4904A, J4905A, J4906A,

J8130A, J8133A, J8153A, J8154A, J8155A, J8164A, J8165A, J8433A, J8474A,

J8680A, J8692A, J8693A, J8697A, J8698A, J8718A, J8719A, J8752A, J8753A,

J8762A, J8770A, J8771A, J8772A, J8773A, J8992A, J9019A, J9019B, J9020A,

J9021A, J9022A, J9028A, J9029A, J9031A, J9032A, J9038A, J9049A, J9050A,

J9085A, J9086A, J9088A, J9089A, J9091A, J9138A, J9145A, J9279A, J9280A,

J9299A, J9310A, J9311A, J9470A, J9471A, J9477A, J9623A, J9624A, J9625A,

J9626A, J9627A, J9727A, J9729A, J9772A, J9773A, J9774A, J9775A, J9776A,

J9778A, J9781A, J9782A, Proliant Series Switches.

• Supported features include the following: Discovery SNMPv1, SNMPv2, SNMPv3,

Telnet, SSHv2, HTTP; Deep Discovery; Link Discovery; Configuration File Backup,

Restore, Deploy; Proscan, Change Management; Action/Adaptive CLI; Direct

Access; Event Management; Fault Management, Performance Monitors (ICMP,

SNMP Interface, SNMP); Reports; Network Views.

Known Issues

• OMNM may not always detect telnet disconnects sent by a device. A timeout may

indicate a false failure for the telnet session when it is actually successful. This

means the system may be unable to detect a disconnect has occurred between

itself and a device when a device reboot accompanies restore or deploy actions.

(4296, 2338, 4323)

• Due to limitation of the switch, we are not supporting temperature. (27574)