Users Guide

Supported Edge Core Devices 61
• Restoring configurations to Dell Networking FTOS devices may produce errors
when individual commands already exist in the running config and cannot be
overwritten. Dell OpenManage Network Manager ignores such errors and reports
success by default since the errors indicate a command was not applied, not that
restoration was unsuccessful. Best practice is to restore to startup config to avoid
these errors, especially when scheduling backup or backing up a group on such
devices. (17991)
• For Dell PowerConnect 8024/F, restoring a configuration for a stack of devices
may fail. (16953)
• CPU and Memory usage values do not appear for PC 5524P (17505)
• You cannot deploy 3.3.x firmware to a PC6248 device that is running 3.x
firmware. Workaround: Manually deploy the firmware. (19236)
• installer need to check for max partition name length (26790)
• Disabling ICMP ping in Discovery Profiles can also disable the Inspect feature.
Workaround: Enable ICMP Ping Devices (as it is by default). (18146)
Supported Edge Core Devices
The following describes supported Edge Core devices and their known issues.
• Supported device models include: ECS4210-12T, ES3510MA.
• Supported features include the following: Discovery SNMPv1, SNMPv2, SNMPv3,
Telnet, SSH, HTTP; Deep Discovery; Link Discovery; Configuration File Backup,
Restore, Deploy; Proscan, Change Management; Action/Adaptive CLI; Event
Management; Performance Monitors (ICMP, SNMP Interface, SNMP, CPU and
memory);Traffic Flow Analyzer, Reports; Network Views.
Known Issues
• In configuration backup , if the user picks a protocol that is not supported by the
driver , the application uses one of the protocols supported by the driver. The
user will not receive an error message saying that the selected protocol is not
supported by the driver or that the protocol used for backup will be one of those
supported by the driver. (28716)
Supported EMC Unisphere Devices
The following describes supported EMC Unispher devices and their known issues.
• Supported devices include: EMC Unity
• Supported features include the following: WBEM HTTPS; Deep Discovery;
Reports; Network Views.
Device Specific Monitors.
At Top level : CpuUtilization, MemoryUtilization, MemoryAvailable,
MemoryUsed, ISCSIReadBytes, NetworkIn, NetworkOut, LUNAverageRead,
LUNAverageWrite, LUNAverageQueueLength, LunReadBytesRate, LUNReadRate,
LUNResponseTime, LUNTotalCall, LUNWritten, LUNWrite.