Users Guide

ManualsBrandsDell ManualsComputer equipmentOpenManage Network Manager

Known Issues

• Ethernet Link Discovery Limitation—For all Force10 devices, Dell

OpenManage Network Manager does not discover ethernet links when they are

attached to management port because the LLDP table on the device is not

populated. (20579)

• Server Start Delay—The Windows tray icon may prematurely indicate

application server has started. Workaround: Wait for five minutes, and the

application server should start completely with the proper icon shown. (18778)

• Virus Warnings—Two files installed with this product—

bash.exe

md5sum.exe

—may trigger warnings with some anti-virus software. If you get a

virus detection warning for these files during installation, take no action. You

may want to turn off virus detection while installing.

• Installing on Windows 2012 must be in compatibility mode. Right-click the

win_install.exe

file (not the shortcut, but the file in the

directory under

the installation source directory), and select the Compatibility tab. Check Run

this program in compatibility mode for ... then select either Windows 7 or Vista.

Command line installations are supported without any compatibility issues.

(22634)

• Microsoft Windows 2008 Terminal Server is not supported. The installer becomes

non-responsive with Data Execution Prevention enabled. This option is disabled

by default on Windows Server 2008, but is enabled on a Windows Server 2008

machine running Terminal Server. (2310)

• Uninstalling sometimes does not delete files in use. Examples can include the

following:

- Uninstalling can leave behind a folder or file in the installation director that

was open.

- If an oware prompt in a command shell is running the oware3rd directory can

remain after restart.

- If your system is slow to shutdown and release the Synergy or Oware services,

the oware/synergy or oware folder can remain after uninstall.

- The uninstaller itself is slow to shutdown and release its own resources. This

can result in the jre folder or the Uninstaller folder remaining after uninstall.

(23146)

• The traffic flow analysis display does not wrap the names of devices listed in the

flow chart, so a published pdf of the chart may cut off names. (26545)

• The Adaptive CLI editor does not apply changes made to all its tabs (Script

Content, Continue Pattern, Error Pattern and Value Extraction) when you click

Apply. The Close button may still erroneously apply changes in other than Script

content tab. Workaround: Delete any erroneously saved change, re-make the

Error Pattern or other changed tab, Apply changes for each tab, one at a time.

Then save the Adaptive CLI from the script edit screen. (hd-2919)

• Network Dashboard portlet fails after the discovery of a WMI device.

Workaround: Restart application and/or web server. Fixed: Release 7.2.3. (25923)

• Converged ethernet switches do not display their equipment type information in

network view (Topology) and the icon is different. Workaround: This

information appears in the Details panel. (24600)

• You cannot filter port-based Adaptive CLIs based on device attributes like Vendor.

This means selecting Actions for a Force10 device port may display other vendors’

Adaptive CLIs (24332)