Users Guide

New Features/Devices Supported in 6.5.3

OS 9

• Support FTOS 9.14.0 for existing models (S30XX, S31XX, S40XX, S48XX (S4810,

S4820T and S5048F will be supported when 9.14.1 is supported in OMNM),

S60XX, S61XX, Z91XX, MXL,MIOA, FNIOM) (30571)

• OS 9 - FTOS or OS10 switches don't provide relevant information in MIBs, so as a

result fans/power supply alerts will not correlate to the appropriate

component.(30975)

• Mac address may show incorrect value for S6010 and S4248FB (31266)

• C9010 not populating service tag at card level (HD-37717)

OS 10

• OS10 does not support SNMP v3 CLI commands (31348)

• OS10 no longer receiving "Availability: partial results" for default interface

monitor (30704)

• OS10 device's firmware currently does not support CPU and Memory

information. (30668)

• OS 10.4.1 does not support QBridge and Bridge mibs. As a result VLAN, Port

switch mode and duplex information are not provided in OMNM (31046, 31031)

• OS 10.4.1 - no warmstart trap seen (31312)

• OS 10.4.1 - no coldstart trap seen (31311)

• OS 10.4.1 The lldpRemTable (from the LLDP-MIB) of a Dell OS 10 device cannot

currently be viewed through the Mib Browser (31324)

• OS 10.4.1 is now supported on 3048-ON, S4048-ON, S4048T-ON, S6010-ON,

Z9100-ON, S4128F-ON, S4148F-ON, S4128T-ON, S4148T-ON, S4148U-ON,

S4148FE-ON, S4248FB-ON, S4248FBL-ON, S5148F-ON, and Z9264F-ON (PV-

30518, PV-30526)

• OS10 - A configuration change trap may not be emitted from the device after a

configuration change (31361)

• OS10 - The speed of the port will show when the port has an ethernet link

connected to the switch, otherwise, the port speed will be showing as 0 (30737)

OS 6

• Support has been added for OS 6.5.2 for existing N-series models and these new

models N3024ET-ON, N3024EP-ON, N3024EF-ON, N3048T-ON (30519)

• The OMNM 6.5.3 release supports a new feature for Dell N-Series CPLD updates

for OS 6.5.2. This feature requires an updated license. You may request the license

by sending an e-mail to sales@dell-omnm.com. (HD-37687)

• The OS 6 N-series switches don't provide relevant information in MIBs, as a

result, fans/power supply alerts will not correlate to appropriate

component.(30975)

Other Device Model Addtions

• Support added for Cisco ISR 4400, ISR 4300 (HD-38526)

• Support added for Fortinet Full SNMP_CLI driver (30483)