Users Guide

Features/Devices Supported in 6.0 Service Pack 3 28
• Virtualization enhancements
- VMware or Hyper VM's with windows or Linux OS can be discovered using
standard WMI or WBEM authentication protocols.
- Linux machine Virtual and Physical now support an SSH management inter-
face.
- ESXi servers that support WBEM can be discovered with WBEM/HTTPS man-
agement interface. The inventory of VM's will be discovered and listed in the
ESXi servers, reference tree.
• OMNM was validated to support these latest Browsers versions:
- Microsoft Internet Explorer v11.0
- Google Chrome V. 41.0.2272.101
- Firefox v37.0
- Safari v8
• New Device Support
- CiscoLSSB – See Supported Cisco LAN Switches Small Business Equipment on
page 49
- Cumulus – See Supported Cumulus Equipment on page 49
- SonicWall – See Supported SonicWall Devices on page 64
- Vyatta – See Supported Vyatta Devices on page 65
Features/Devices Supported in 6.0 Service Pack 3
• Added support for Dell Networking models: N1524, N1524P, N1548, N1548P.
(27151)
• Added 9.8 firmware support for Dell Networking FTOS models: IOA/MXL, S4810,
S4820, S5000, S6000, Z9500, FN 410S/410T, FN 2210S, S3048 ON, S4048 ON.
(27237)
Features/Devices Supported in 6.0 Service Pack 2
• Traffic Flow now displays estimates as well as raw data.
Refer to Enabling Estimated Flows Based on Sample Flows section in User Guide or
online help for details.
• Installer now checks partition name for length and special characters.
Refer to Partition Name Limitations section in User Guide or online help for
details
• Added support for Wireless Controllers: W-7005, W-7010, W-7030.
• Added support for Instant Access Points: W-IAP103, W-IAP204, W-IAP205, W-
IAP214, W-IAP215, W-IAP224, W-IAP274, W-IAP275.
• Added support for Access Points W-AP103, W-AP103H, WAP204, W-AP205, W-
AP214, W-AP215, W-AP224, W-AP225, W-AP274, W-AP275.
• Added 6.3.1.8 firmware support for wireless Instant Access Point devices.
• Added 6.4.2.4 firmware support for wireless controller devices.