Owners Manual

Setting Up Authentication | Getting Started
78 OMNM 6.5.2 User Guide
8 Remove the default PowerUser role (optional), and add the administrator role for the user,
then click
Save .
Now you can enter LDAP server information. Be patient, your changes may take a moment to
take effect.
Step2: Add an LDAP server
In the LDAP tab of the Authentication screen, check the Enabled checkbox, then click Add under
LDAP Servers and fill in that screen as appropriate.
Authentication
Enabled
Import/Export
Import Enabled
Import on Startup Enabled
NOTE:
Notice that several test buttons appear in the LDAP screens, for example, Test LDAP Connection. Use
these to validate your entries as you make them.
LDAP Server Settings
The following settings are required (the values below are examples, only):
Connection
Base Provider URL : ldap://192.168.50.25:389
Base DN : dc=test-exchange,dc=oware,dc=net
Principal: [e-mail]
NOTE:
The Principal user must have the necessary administrator rights in Active Directory Server or any other
LDAP server
Credentials: ********
Users
Authentication Search Filter:(sAMAccountName=@screen_name@)
Import Search Filter: (objectClass=person)
User Mapping
Screen Name: sAMAccountName