Owners Manual

Action Groups | Actions and Adaptive CLI
OMNM 6.5.2 User Guide 617
How To:
Configure an Action Group
Follow these steps to configure an Action Group
1 Right-click in the Action Groups portlet, and select New.
2 Name the Action Group, and optionally type a Description.
3 Click Add Action.
4 Select an action (with the green plus at the top of the screen), and optionally add a
Description in the field to the right of the selection.
5 To associate devices with this action, click the Add button in the Associated Targets panel,
and select the device(s).
6 Click Done .
7 Review the selected devices, and click Apply once that list is correct.
8 Review the added Actions, and insure they are in the correct order. Re-order them, if
necessary.
9 Click Save to preserve your new Action Group.
10 Right-click and select Execute to test the Action Group.
11 If appropriate, and execution is correct, right-click to Schedule for this Action Group.
Configure its occurrence in the Schedule panel of the screen that appears next, and
Save that
schedule.