Owners Manual

Active Performance Monitor Support | Actions and Adaptive CLI
OMNM 6.5.2 User Guide 609
Active Performance Monitor Support
You can monitor Adaptive CLI execution results with Active Performance Monitor. To do this, you
must select Adaptive CLI as the monitored type when creating a new performance monitor (see
Resource Monitors on page 371), then select a target entities (with the Add button in the top
panel) and a particular Adaptive CLI (with the green plus [+] in the Adaptive CLI Properties panel
at the bottom of this screen. Click the
Edit (page) icon to select the Input Parameters to monitor
once you have selected an Adaptive CLI.
The user can choose an Adaptive CLI to monitor and may have to configure both its input values
and metric type for each output attribute. The Input data depends on what the Adaptive CLI
attributes have configured.
Input Parameters
In Active Monitoring, all attributes of the schema appear in the Input Data for user-entered values.
You must enter the data necessary for all selected targets’ scripts. To enter data, click
Edit and then
enter values. Clicking
Apply switches the panel back to read-only mode. You must click Save to
preserve input or output data configurations.
Monitor Attributes
Configure Adaptive CLI output attributes for monitoring in this tab in the lower panel of the
Monitor Editor screen. You can monitor only exposed attributes of numeric or boolean types. To
change metric type, select the row and click the
Edit button to its right.
An Adaptive CLI Properties screen appears that reminds you of the
Attribute Name, and Attribute
Ty p e ,
where you can Enable the attribute monitoring, and select Gauge, Counter or Boolean
buttons to the right of this panel to configure the metric type of the selected output data.