Owners Manual

Setup Tasks | Traffic Flow Analyzer
OMNM 6.5.2 User Guide 531
5 If this operation was successful then the port or interface should be configured to send traffic
flows to OpenManage Network Manager using one of the supported protocols (sFlow,
NetFlow, IPFIX).
Removing TFA Configuration from a Managed Resource, Port, or
Interface
To remove the TFA configuration for a device, whether this be the top-level device or a
subcomponent (port or interface) follow these steps:
1 From the Managed Resources portlet, right-click on the appropriate device.
2 Select Traffic Flow Analyzer >Remove Configuration.
3 A popup box will appear indicating that no parameters are necessary to perform this action.
Click Execute.
4 If this operation was successful then the device should be configured to no longer send traffic
flow data to OpenManage Network Manager.