Owners Manual

Create Source Group Criteria | Change Management and Compliance
OMNM 6.5.2 User Guide 507
neighbor 4.5.6.7 activate
neighbor 4.5.6.7 route-map allanRM02 in
default-information originate
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf VPN_PE_A
redistribute ospf 10 vrf VPN_PE_A match internal external 1 external 2
no auto-summary
no synchronization
exit-address-family
!
6 Applying the second group criterion on the above result divides the source:
Source 1:
address-family ipv4
redistribute connected route-map map-12
redistribute static route-map hjlhjhjhjk
redistribute ospf 888 metric 500 match internal external 2 nssa-external
1 nssa-external 2 route-map allanRM03
neighbor 2.3.4.5 activate
neighbor 2.3.4.5 route-map allanRM01 in
neighbor 4.5.6.7 activate
neighbor 4.5.6.7 route-map allanRM02 in
default-information originate
no auto-summary
no synchronization
exit-address-family
Source 2:
address-family ipv4 vrf VPN_PE_A
redistribute ospf 10 vrf VPN_PE_A match internal external 1 external 2
no auto-summary
no synchronization
exit-address-family
This creates two sources sections.
7 Now OpenManage Network Manager applies the regex in the criteria field to each of the
sources. It returns
true only if both sources pass (we selected the Match All radio button). In
this case “Source 2" does not have those lines, so OpenManage Network Manager returns a
false value.
8 The error details appear in the audit trail panel.