Owners Manual

Configuration Management Portlets and Editors | Configuration Management
OMNM 6.5.2 User Guide 455
OS Image Deploy
Use the OS Image Deploy window to specify firmware image, targets for deployment, device
options, and then schedule the OS image deployment.
Access this window by right-clicking a configuration and then selecting New > OS Image Deploy.
The OS Image Deploy Parameters window has the following fields and options.
See Schedules
Portlet
on page 158 for scheduling fields and options descriptions.
Device Options Lists the tabs for each device based on the restore target selected. Click a device tab
to view its options, such as Replace or Merge Config, Reload Device If Necessary,
Load Action, on so on. Select the appropriate action for each option.
Field/Option Description
Firmware Image Specifies which image you want to deploy.
Description Displays the selected firmware image description.
Version Displays the selected firmware image version.
Transfer Protocol Specifies which protocol is used (Default, FTP, TFTP, or SFTP) to transfer files.
Device Class Displays the selected firmware’s device class.
Device Family Displays the selected firmware’s device family.
Add Equipment Adds the selected equipment to the Targets for Deployment list.
Add Groups Adds groups of devices to the Targets for Deployment list.
Remove All Deletes all devices and groups from the Targets for Deployment list.
Field/Option Description