Owners Manual

OMNM Administrative Tools | Getting Started
OMNM 6.5.2 User Guide 43
MIB Browser Tool
The first button displays the MIB browser with default SNMP settings. You can Edit the settings to
match the device’s SNMP community settings and then save them. The next time Network Tools
invokes the MIB browser, it defaults to your previous settings.
Once you are done editing the SNMP settings, click Save . Click the Browse tab to look through
available MIBs as you would ordinarily do in MIB browser. See
MIB Browser Tool on page 43 for
more about using the MIB browser. You can also browse MIBs in the attribute selection panel for
the SNMP monitor. See
SNMP on page 413.
NOTE:
Locations for MIB file included with your package are subject to change without notice, but generally are
under the owareapps/[application name]/mibs directory for different application modules. Refer to the
Installation Guide for additional information.
Direct Access Tool
The third button on the Network Tools portlet toolbar opens the Direct Access tool. It provides a
command line interface terminal for Telnet, SSH, and SSH V2 access to the device.
Click and select the type of direct access you want.
•
Direct Access - Telnet
• Direct Access - SSH/SSH V2
Or see Firefox Browser Configuration for Direct Access on page 44.
Direct Access - Telnet
Telnet direct access connects to the device with telnet and displays the terminal session. You must
login to the device manually, unlike the method described for discovered devices in
Network Tools
on page 42.